Troubleshooting – VTech gz5838 User Manual

Page 34

Advertising
background image

www.vtechphones.com

34

Problem

Suggestion

There is noise

or interference

during a telephone

conversation .

My calls cut in and out

when I am using the

cordless handset .

• The handset may be out of range . Move it closer to the telephone base .

The handset may be out of range . Move it closer to the telephone base .

• Appliances or other cordless telephones plugged into the same circuit as the telephone base

Appliances or other cordless telephones plugged into the same circuit as the telephone base

can cause interference . Try moving the appliance or telephone base to another outlet .

• Other electronic products can cause interference to your cordless telephone . Try installing your

Other electronic products can cause interference to your cordless telephone . Try installing your

telephone as far away as possible from the following electronic devices: wireless routers, radios,

radio towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors,

televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones .

• Microwave ovens operate on the same frequency as your telephone . It is normal to experience

Microwave ovens operate on the same frequency as your telephone . It is normal to experience

static on your telephone while the microwave oven is operating . Do not install this telephone

in the same outlet or near a microwave oven .

• If your telephone is plugged in with a modem or a surge protector, plug the telephone (or

If your telephone is plugged in with a modem or a surge protector, plug the telephone (or

modem/surge protector) into a different location . If this solves the problem, re-locate your

telephone or modem farther apart from each other, or use a different surge protector .

• The layout of your home or office might be limiting the operating range. Try moving the telephone

The layout of your home or office might be limiting the operating range. Try moving the telephone

base to another location, preferably a higher location for better reception .

• Disconnect the telephone base from the modular jack and plug in a corded telephone . If calls

Disconnect the telephone base from the modular jack and plug in a corded telephone . If calls

are still not clear, the problem is probably in the wiring or local service . Contact the local

telephone company (charges may apply) .

• Press

Press

CHAN/REMOVE while on a call until the interference has been eliminated .

• If the other telephones in your home are having the same problem, the problem is in the wiring

If the other telephones in your home are having the same problem, the problem is in the wiring

or local service . Contact the local telephone company (charges may apply) .

• Do you have DSL service�� If yes, you need to have a DSL filter installed at every telephone jack

Do you have DSL service�� If yes, you need to have a DSL filter installed at every telephone jack

that has a telephone connected to it. Contact your DSL service provider for filter information.

Troubleshooting

Advertising