Wolf Appliance Company M I C R O W AV E O V E N - Manual (Page 44)

44
W O L F M I C R O W A V E O V E N C A R E
I N T E R I O R
Cleaning is easy because little heat is gener-
ated to the interior surfaces; therefore, there is
no baking and setting of spills or spattering.
To clean the interior surfaces, wipe with a soft
cloth and warm water. Do not use abrasive or
harsh cleaners or scouring pads. For heavier
soil, use baking soda or a mild soap; rinse
thoroughly with hot water. Never spray oven
cleaners directly onto any part of the oven.
Waveguide Cover – The waveguide cover is
made from mica so requires special care. Keep
waveguide cover clean to assure good oven
performance. Carefully wipe with a damp cloth
any food spatters from the surface of the cover
immediately after they occur. Built-up splashes
may overheat and cause smoke or possibly
catch fire. Do not remove waveguide cover.
Turntable and Turntable Support – The
turntable and turntable support can be
removed for easy cleaning. Wash them in mild,
sudsy water; for stubborn stains use a mild
cleanser and non abrasive scouring sponge.
They are also dishwasher-safe. Use upper rack
of dishwasher. The turntable motor shaft is not
sealed, so excess water or spills should be
wiped up immediately.
O D O R R E M O V A L
Occasionally, a cooking odor may remain in
the oven. To remove, combine 1 cup (237 ml)
water, grated lemon peel and several whole
cloves in a 2 cup (473 ml) glass measuring
cup. Boil for several minutes using 100%
power. Allow to set in oven until cool. Wipe
interior with a soft cloth.
E X T E R I O R
Outside – The outside surface is painted.
Clean outside with mild soap and water; rinse
and dry with a soft cloth. Do not use any type
of household or abrasive cleaner.
Door – Wipe window on both sides with a
damp cloth to remove any spills or spatters.
Metal parts will be easier to maintain if wiped
frequently with a damp cloth. Avoid the use of
spray and other harsh cleaners as they may
stain, streak or dull the door surface.
Touch Control Panel – Care should be taken
in cleaning the touch control panel. If control
panel becomes soiled, open oven door before
cleaning. Wipe panel with a cloth dampened
slightly with water only. Dry with a soft cloth.
Do not scrub or use any sort of chemical
cleaners. Close door and touch STOP/CLEAR.
C L E A N I N G A N D C A R E
Disconnect power cord before cleaning
or leave door open to inactivate the oven
during cleaning.