Wegener Communications 4422 - Manual (Page 37)

Page 37
Page 37 of 72 UTY4422-002
This interface supports a variety of controls and status displays, including the following:
1. Status.
2. Selecting and configuring the Serial Port devices.
3. Front panel e-mail.
3.8.3 Overview
The front panel consists of a 2 X 20 Display and six push buttons. Essentially all control
available through the terminal is available via the front panel. The front panel can also be used
to view a
COMPEL downloadable text message, commonly called ‘e-mail.’ This message is
volatile and can contain up to 512 characters. The Display can be in one of the following modes:
Table 18. Display Modes
Mode Description
HOME Display shows ALARM or WARNING message (if applicable), or carrier
frequency, program ID and TEMP (if inserting). Display returns to this
screen after push buttons are inactive for 5 minutes or if both ENTER and
SELECT buttons are pressed simultaneously.
SN Unit Serial Number displayed for a few seconds if ENTER is pressed
while in HOME screen.
MENU Entered from Home mode. Display shows menu for each available
command group.
PARAMETER Entered from Menu mode. Display shows specific parameter associated
with command group.
EDIT Entered from Parameter mode. Display blinks edit field when in this
mode.