Westell Technologies Webshare 36R566 - Manual (Page 15)

Installation/User Guide
Model # –WebShare
Part # – 030-300109 Rev C
Revision Date – 09/2000
 2000 Westell, Inc. Printed in the USA
030-300109C
14
4.1.2 TCP/IP Configuration
It is recommended that Dynamic Host Configuration Protocol (DHCP) be enabled on the adapter connected to
your WebShare Proxy Router. If you have multiple Ethernet adapters, select the one to be used with the
WebShare Proxy Router. Figure 7 shows an example of a window with multiple Ethernet connections.
Figure 7. TCP/IP Configuration Window
The IP address should be left at the factory default shown in Figure 8.
Figure 8. IP Address Window
Click Next to display the Check Setup Information window (Figure 9). This window shows the current settings
that you have provided.