Westell Technologies Webshare 36R566 - Manual (Page 37)

Installation/User Guide
Model # –WebShare
Part # – 030-300109 Rev C
Revision Date – 09/2000
 2000 Westell, Inc. Printed in the USA
030-300109C
36
Figure 32. WebShare IP Default Reset Utility Dialog Box
Click the Default Reset button, shown in Figure 29, to restore the factory default values (Figure 28).
Figure 33. Default Reset Dialog Box
Click OK to return to the default settings.
8.1.4.3 IP Address
The Internet Protocol (IP) address is a unique 32-bit number used to identify the host computer connected to a
TCP/IP network. The value of the IP Address is represented in a dotted decimal format. WebShare assigns
192.168.0.1 to this address by default. This value may be changed to any valid IP address e.g. an existing
address assigned for local LAN administration. Note: If the default IP Address needs to be changed, the DHCP
Base and End addresses will also have to be adjusted. All changes will be entered in the LAN Advanced
Configuration screen.
8.1.4.4 Subnet Mask
The subnet mask is a 32-bit number used to identify the network and host segments of an IP address. This
value is represented in the same dotted decimal format as the IP address. This is the subnet mask associated
with the IP address above. This value should not be set to a subnet address greater than 255.255.255.248 to
accommodate the WebShare IP.
The default value for the subnet mask is 255.255.255.0.
8.1.4.5 Domain Naming System (DNS) Primary
The domain naming system is a convention used for identifying computers attached to the Internet or a Local
Area Network (LAN). A host to resolve a domain name to the IP address uses the main DNS server. The
secondary or backup DNS server performs the same function as the main server.
This IP address represents the address that WebShare uses to respond to primary DNS queries from your
computer. The default value is 192.168.0.2.