Westell Technologies Webshare 36R566 - Manual (Page 26)

Installation/User Guide
Model # –WebShare
Part # – 030-300109 Rev C
Revision Date – 09/2000
 2000 Westell, Inc. Printed in the USA
030-300109C
25
7. Configuring WebShare
Use this section when adding new accounts or changing account parameters.
7.1 Accessing the WebShare Management Interface
To access the Web browser management interface, perform the following steps:
1. Make sure that your computer is turned OFF.
2. Verify that an Ethernet connection is established between your computer and the WebShare Proxy
Router.
3. Turn the WebShare Proxy Router ON.
4. Turn the computer power
ON.
Note: Because the computer gets the IP address from the WebShare Proxy Router, these steps ensure the
WebShare Proxy Router is on before the computer boots up.
5. After the operating system has completely loaded, verify that the Link indicator light on the top of the
WebShare Proxy Router is steady green.
6. Click on the WebShare icon on the desktop.
Figure 21 shows the initial Home page of a WebShare Proxy Router that contains no PPP accounts.