Wire World Of America 1800 - Manual (Page 115)

109
The Intelligent Gateway Indicator Lights
Intelligent Gateway indicator and status lights
The Intelligent Gateway has three indicator lights that can be used to diagnose installation and connection
problems. The following tables describe how to interpret the
POWER , BROADBAND LINK , and LOCAL
NETWORK lights.
Power light Operating state
OFF The Intelligent Gateway is not getting power.
Blinking green The Intelligent Gateway is powering up.
Solid green Power is on.
Solid red System error. Contact Technical Support.
Broadband Link light Operating state
OFF No broadband signal is present. The Intelligent Gateway is not plugged into a
power outlet, or it is not physically connected to your broadband service.
Blinking orange The Intelligent Gateway is attempting to establish a physical broadband
connection.
Solid red The Intelligent Gateway has not detected a broadband signal.
Solid orange The Intelligent Gateway has established a physical broadband connection
but was not able to successfully connect to your Internet Service Provider, or
has not yet been configured.
Blinking green The Intelligent Gateway is attempting to establish a connection to your
Internet Service Provider.
Solid green The Intelligent Gateway is fully connected to your Internet Service Provider.
Local Network light Operating state
OFF The Intelligent Gateway is not plugged into a power outlet, or it is not
connected to any computer via USB, Ethernet, HPNA, or wireless.
ON The Intelligent Gateway is connected to a computer via USB, Ethernet,
HPNA, or wireless.