Wire World Of America 1800 - Manual (Page 73)

67
Adding sites
To add a site to either the blocked or approved list, enter the address of the Web site in the Block Sites box
or the Approve Sites box and click
ADD .
Note: When adding a specific site to either list, you can exclude the http://www portion of the address.
For example, if you are adding http://www.abc.com to either list, you need only enter abc.com.
Removing sites
To remove a Web site from one of the lists, highlight the site and click DELETE .
Allowing blocked sites
To stop blocking all of the sites listed in the Block Sites list (in other words, allow all sites), remove the
check from the Block sites listed checkbox.
Blocking approved sites
To stop permitting access to the Approve Sites list, remove the check from the Always allow sites listed
checkbox.
Click NEXT to save all of the blocked and approved Web sites you have entered and proceed to the third
step. Click DONE to return to the home page.
Step 3: Assign computers to screening groups
After setting up the content categories and sites that are blocked and approved for a screening group, you
can assign computers to that screening group.
To set up computer assignments, use the Settings area of the Assign Computers to Screening Groups page.
To assign a computer to a particular group, click the radio button to the right of the computer in the column
of the desired group.
The Default Settings computer is a placeholder for any new computers that join the local network. For
example, if you buy a new computer or bring a laptop home from work for the first time, when you add this
new computer to your local network it automatically acquires the default access configuration you have
specified. Initially, you should use the maximum amount of screening as the default and then reduce the
level of blocked content as needed.
Click SAVE to record your changes.