How do i change to a static trusted ip address, How do i set up and disable webblocker – WatchGuard Technologies SOHO User Manual
Page 110
Troubleshooting
110
How do I change to a static trusted IP address?
Before you can use a static IP address, you must have a base
Trusted IP address and subnet mask.
The following IP address ranges and subnet masks are set aside for
private networks in compliance with RFC 1918. Replace the Xs in
the network IP address with a number between 1 and 254. The
subnet addresses do not need to be changed.
To change to a static trusted IP address:
1
With your Web browser, go to the SOHO System Status page
using the Trusted IP address of the SOHO.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select Network =>
Trusted.
3
Disable the checkbox labeled Enable DHCP Server and then
click the Submit button.
4
Enter the information in the appropriate fields. Click the
Submit button.
How do I set up and disable Webblocker?
1
With your Web browser, go to the SOHO System Status page
using the Trusted IP address of the SOHO.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select WebBlocker =>
Settings.
The WebBlocker Settings page appears.
Network IP range
Subnet mask
10.x.x.x
255.0.0.0
172.16.x.x
255.240.0.0
192.168.x.x
255.255.0.0