WatchGuard Technologies SOHO User Manual
Page 44
Configuring Your External Network
44
ISP to see if they use PPPoE. If you cannot find this information,
contact your ISP and ask. You will need your PPPoE login name
and password.
To configure the SOHO for PPPoE:
1
Open your Web browser and click Stop.
At this point, the Internet connection is not fully configured, and the
computer cannot load your home page from the Internet. However, the
computer can access special configuration Web pages installed on the
SOHO itself.
2
With your Web browser, go to the SOHO System Status page
using the Trusted IP address of the SOHO.
For example, if using the default IP address, go to: http://192.168.111.1
3
From the navigation bar on the left side, select Network =>
External.
The External Network Configuration page appears.
4
From the Configuration Mode drop list, select PPPoE Client.
The PPPoE Client configuration page appears.