WatchGuard Technologies SOHO - Manual (Page 29)

User Guide 5.0 29
The Installation Process
Determine your current TCP/IP settings
For your reference, record the computer’s current TCP/IP settings
in the chart provided at the end of this section. Different operating
systems will supply different information. To locate your settings:
Microsoft Windows NT or 2000
1 Click Start => Programs => Command Prompt.
2 At the C:\ prompt, enter ipconfig/all . Press Enter .
3 Enter your current TCP/IP settings in the chart provided
below.
4 Click Cancel .
Microsoft Windows 95 or 98 or ME
1 Click Start => Run.
2 Type: winipcfg . Click OK .
3 Select the “Ethernet Adapter.”
Enter your current TCP/IP settings in the chart provided below.
4 Click Cancel.
Macintosh
1 Click Apple menu => Control Panels => TCP/IP .
2 Enter your current TCP/IP settings in the chart provided
below.
3 Close the window.
Other operating systems (Unix, Linux)
1 Consult your operating system guide to locate the TCP/IP
screen.
2 Enter settings in the chart provided below.