Westell Technologies Versalink 327W - Manual (Page 121)

030-300500 Rev. A 121 October 2006
User Guide VersaLink™ Gateway (Model 327W)
If you click enable, the following Service Configuration screen will display. Static NAT is now enabled for the
device you selected.
13.7 Disabling Static NAT
If you click on static NAT in the Service Configuration screen, the following screen will be displayed, select a
device name from the Static NAT Device drop-down arrow, or type the IP address of the device in the field labeled
IP Address. Click on disable. This will automatically disable the Static NAT feature for that device.