Westell Technologies Versalink 327W - Manual (Page 43)

030-300500 Rev. A 43 October 2006
User Guide VersaLink™ Gateway (Model 327W)
If you clicked disable in the preceding screen, the following pop-up screen will be displayed. Click on OK.
If you clicked OK in the Disable IP Passthrough? screen, the following pop-up screen will be displayed. This
screen will allow the modem to be reset and the new configuration will take effect. Click on OK.
If you clicked OK in the preceding screen, the following screen will be displayed. VersaLink will be reset and the
new configuration will take effect.
After a brief delay, the home page will be displayed. Confirm that you have a DSL sync and that your PPP session
displays UP. (Click on the connect button to establish a PPP session). Next, Select Single Static IP from the
Configuration menu to confirm that Single Static IP is disabled, as shown in the following screen.