Weslo Daybreak SPRW52464 - Manual (Page 11)

11
10. Place the Spa Cover (11) over the Side Panels (1)
and the Spa Jet Unit (13). Be sure that the Spa
Cover is properly centered and that the corners
of the Spa Cover line up with the corners of the
Side Panels (1).
Snap a Buckle (21) onto each of the seven latches
on the Spa Cover (11).
See the inset drawing. Position one of the Buckles
(21) on the Side Panel (1) and hold the Buckle in
place, so the strap on the Spa Cover (11) is tight.
(Note: It may be easier to position the Buckles if a
second person holds the strap on the opposite side
of the Spa Cover tight.) Do not place the Buckle
over one of the grooves in the Side Panel.
Remove the latch. Attach the Buckle to the Side
Panel with two Buckle Screws (23). Note: It may
be helpful to use a hammer and a nail to tap
starter holes in the Side Panels. You may also
want to apply a little soap or wax to the screw
threads.
Attach the other six Buckles (21) to the Side Panels
(1) in the same manner.
1
13
11
21
23
Latch
Strap
21
10