Choosing a location for the daybreak – Weslo Daybreak SPRW52464 User Manual

Page 7

Advertising
background image

7

CHOOSING A LOCATION FOR THE DAYBREAK

There are many factors to consider when choosing a location to set up the DAYBREAK. These factors vary
depending on whether you use the DAYBREAK inside or outside. We have listed several factors you may wish
to consider as you decide where you want to use the DAYBREAK.

If you set up the DAYBREAK inside:

1. The DAYBREAK will increase the level of humidity

in your home. The location you choose should be
well ventilated. You may need to install a ventila-
tion fan or use a dehumidifier.

2. The location must be close to an electrical outlet.

Do not use an extension cord with the DAY-
BREAK.

3. The DAYBREAK should be close to a source of

water.

4. Do not use the DAYBREAK on carpet or other

material that may be damaged by moisture. We
recommend that you place the DAYBREAK on a
water- and stain-resistant, non-slip surface with a
floor drain for any water that may splash from the
DAYBREAK.

5. Be sure that the location you choose is stable. It

must be able to support the weight of the DAY-
BREAK when it is filled with water, plus the weight
of the occupants. The DAYBREAK weighs approx-
imately 1600 pounds when filled with water.

6. Do not use the DAYBREAK above a finished living

area, due to the risk of water damage.

7. Be sure that there is room around the DAYBREAK

to permit servicing of the unit. The diameter of the
tub is 60Ó. You should allow for this size, plus the
size of the spa jet unit, when choosing the loca-
tion.

8. Be sure to note any other considerations, such as

aesthetics or privacy concerns, that may affect the
safety or enjoyment of using the DAYBREAK.

If you set up the DAYBREAK outside:

1. You should check your local building codes con-

cerning the use of outdoor spas.

2. The location must be close to an electrical outlet.

Do not use an extension cord with the DAY-
BREAK.

3. The DAYBREAK should be close to a source of

water.

4. We recommend that you place the DAYBREAK on

a water- and stain-resistant, non-slip surface.

5. Be sure that the location you choose is stable. It

must be able to support the weight of the DAY-
BREAK when it is filled with water, plus the weight
of the occupants. The DAYBREAK weighs approx-
imately 1600 pounds when filled with water.

6. Think about environmental factors, such as rain,

wind, shade, sunlight, and so forth.

7. You should be able to monitor the use of the DAY-

BREAK from your home, to prevent unauthorized
use by children.

8. Be sure that there is room around the DAYBREAK

to permit servicing of the unit. The diameter of the
tub is 60Ó. You should allow for this size, plus the
size of the spa jet unit, when choosing the loca-
tion.

9. Be sure to note any other considerations, such as

aesthetics or privacy concerns, which may affect
the safety or enjoyment of using the DAYBREAK.

Advertising