Wren Associates DRS5016 User Manual
Page 25
Installation and Connection
DRS5116
Wren
2003. 09. 06 (v 1.0)
25
6.2. Selecting DRS
If several DVRs are set with unique ID numbers, they can be controlled with one remote controller. To
select a specific (DRS), keep pressing the ID button on the remote controller until a buzzer sounds during
the first two seconds.
<Note>
Because the remote controller ID is sixteen, the DVR will correspond until the ID button is pressed
sixteen times.
6.3. Operable Range of Remote Controller
6.4. Loading the Batteries into Remote Controller
The remote controller requires two AAA-type batteries.
1. Remove the battery cover.
2. Taking care that the poles (+/-)
are correctly positioned.
3. Replace the battery cover.
<Note>
Batteries are not included as a packing accessory.