Wren Associates DRS5016 - Manual (Page 46)

Installation and Connection DRS5116
Wren
2003. 09. 06 (v 1.0) 46
9.5. Connecting USB Device
The USB port can be used to copy up to one minute of images to a USB Flash memory disk. When
connecting a USB device, do not exceed the rated values of the USB device.
USB Spec. Ver 1.1 (Max 12M bps)
Available Device USB Memory Stick,
Output Voltage/Current Max. 200mA per DC 5V Port
<Note>
The disk should be formatted with FAT32 type.
If properly connected, the disk is recognized automatically as shown in the following picture. To copy
images, the process is as follows: Set copy range (up to 1 minute) Æ Select drive Æ Copy (press “Start”).