Wren Associates DRS5016 - Manual (Page 76)

Basic Configuration DRS5116
Wren
2003. 09. 06 (v 1.0) 76
16.1.2. Recording
Its recording values are applied to all active channels (4~16 Model Dependant) for all time periods.
<Button control>
- Press the [MENU] button and select “Recording” from the “Quick Setup” tab.
Configuration Status
The Configuration Status displays the recording setup status. If the recording is configured with the
“Quick Setup”, ’Macro Setup’ will be displayed. If the recording is configured with the “Normal” and
“Alarm” recording, ‘Custom Setup’ will be displayed.
<Note>
When all analog cameras' normal recording conditions are set identically, the status is marked as 'Macro
Setup'. Otherwise, it is marked as 'Custom Setup'.
Channel Status
When the Channel Status is set as “On,” all analog channels will record based on the Quick Setup settings.
Recording Speed/Quality
There are five conditions (No Rec./Low/Standard/High/Custom).
All conditions except “Custom” will synchronize “Speed (fps)” and “Quality” automatically;
(1) “Low” setting is 1fps/Q5
(2) “Standard” setting is 5fps/Q5
(3) “High” setting is 15fps/Q5
(4) “Custom” setting, Speed (fps) and Quality can be set separately