Wren Associates DRS5016 - Manual (Page 31)

Installation and Connection DRS5116
Wren
2003. 09. 06 (v 1.0) 31
8.3. Setting Recording Condition
Recording conditions under the “Quick Setup” menu tab will apply the same values to all analog channels
1~16. All settings are applied for 24 hours/day regardless of the values set for “Time Schedule” or
“Alarm Rec.”
(1) Press the [MENU] button, and select “Quick Setup.”
(2) Move to sub-menu by pressing the [ENTER] or the [▼] buttons.
(3) Select “Recording” using the [▲/▼] buttons and press the [ENTER] button.
8.3.1. Configuration Status
This function displays the recording configuration status. When setting up through the “Quick Setup”
menu, the “Quick Setup” will be shown. When setting up through the “Normal Rec.” or “Alarm Rec.,”
the “Custom Setup” will be shown.
<Note>
Only when all the DRS channels' normal recording conditions are set through 'Macro Setup' and
maintained, it is marked as 'Macro Setup'. Otherwise, it will be marked as 'Custom Setup'.