Westell Technologies 2200 - Manual (Page 25)

030-300354 Rev. B 21 July 2003
Section 6-Installing the USB Drivers
Westell Dual Connect NAT Router User Guide
6. Windows 2000: When the System Settings Change screen appears, the USB drivers are installed properly. See
Figure 27. Click Yes.
Figure 27. Restart Your Computer
Congratulations! You have completed the software installation for the USB drivers. After the computer has
restarted, the Router is ready for use. You must now go to section 7.
6.5 Installing the USB Driver for Windows XP
1. Windows XP: After you have connected the Westell Dual Connect Modem to your PC, the Found New
Hardware Wizard window will open. See Figure 28. Select option button Install the software automatically
(Recommended). Click Next.
Figure 28. Windows XP