Westell Technologies 2200 - Manual (Page 38)

030-300354 Rev. B 34 July 2003
Section 8-Configuring the Router for Internet Connection
Westell Dual Connect NAT Router User Guide
8.4 Service Configuration
To use an application that utilizes the NAT (Network Address Translation) protocol, you will have to configure your
Router’s NAT settings. Select Service Configuration from the Configuration menu.
Westell has developed an extensive list of NAT services, and you may select any service from this list. By selecting
your specific NAT service and setting up a NAT service profile, you will ensure that the appropriate ports on your
Router are open and that the required application traffic can pass through your LAN. For a list of supported NAT
services, go to section 17 (NAT Services).
This screen allows you to attach a predefined NAT service to your default profile. Once you have selected a NAT
service from the Service Name pull-down arrow, click on enable.