Westell Technologies Westell UltraLine 7400 - Manual (Page 25)

030-300381 Rev. A 25 January 2004
UltraLine Home DSL Router (Models 7400, 7401)
User Guide
4. Windows ME: When the System Settings Change screen appears, the USB drivers are installed properly. See
Figure 19. Click Yes.
Figure 19. Windows ME
Congratulations! You have completed the software installation for the USB drivers. After the computer has
restarted, the Router is ready for use. You must now go to section 8 to configure your Router for Internet
connection.
7.4 Installing the USB Driver for Windows 2000
NOTE: The actual information displayed in the USB screens may vary according to product.
1. Windows 2000: After you have connected the Router to your PC, the Found New Hardware window appears
(Figure 20). In a few moments, the Found New Hardware Wizard window appears (Figure 21). Click Next.
Figure 20. Found New Hardware
Figure 21. Welcome to Install Device Driver