Westell Technologies Westell UltraLine 7400 - Manual (Page 80)

030-300381 Rev. A 80 January 2004
UltraLine Home DSL Router (Models 7400, 7401)
User Guide
12.4.7 VLAN
The following settings will be displayed if you select VLAN from the Advanced LAN menu.
VLAN Enable
Factory Default = DISABLED
If this box is check, VLAN will be Enabled. This will allow VLAN
tagging to occur according to the data port’s configuration.
LAN Port This allows you to select the LAN port that you wish to configure.
Possible responses are:
Ethernet Port 1
Ethernet Port 2
Ethernet Port 3
Ethernet Port 4
USB Port
VLAN ID This allows you to assign a VLAN ID to the port.
Possible responses are:
1 through 8
VLAN Priority This allows you to set the VLAN priority for the port.
Possible responses are:
0 through 7
Outgoing VLAN Tag This allows you to keep or remove the VLAN tag on the port when
data is outgoing.