Westell Technologies Westell UltraLine 7400 - Manual (Page 64)

030-300381 Rev. A 64 January 2004
UltraLine Home DSL Router (Models 7400, 7401)
User Guide
The information displayed in the following screen depends upon the Firewall security setting you have selected. If
you selected “None” in the preceding Firewall Security Level screen, no values will be displayed in the following
User Defined Firewall Rules screen.
If you clicked Apply in the User Define Firewall Rules screen, the following pop-up screen will be displayed.
Click on OK if you want your new firewall setting to take effect. If you click on Cancel, your new firewall settings
will not take effect.
If you want to save your new firewall settings, click on save in the screen labeled User Define Firewall Rules.
NOTE: Westell recommends that you do not change the settings in the User Defined Firewall Rules screen. If you
need to reset the Router to factory default settings, push the reset button on the rear of the Router.
Note: The information displayed in this screen
depends on the level of security you have selected.