weber 3400 Series - Manual (Page 37)

37 37
Crossover tube
Figure 19
Figure 16
View from behind
cooking box
Wing nuts
Figure 17
Guide screw
Figure 18
Figure 20
Valve
Burner
(a)
(b)
d) Unlatch the Spider Stopper Guards and remove.
Figure 16.
e) Remove the manifold bracket and unscrew the two
wing nuts that hold the manifold to the cooking box.
Pull the manifold and valve assembly out of the
burners and carefully set it down. Figure 17.
f) Slide the burner assembly out from under the guide
screw and washer in the corners of the cooking box.
Figure 18.
g) Lift and twist the burner assembly slightly, to separate
the crossover tube from the burners. Figure 19.
Remove the burners from the cooking box.
h) To reinstall burners, reverse steps c) through g).
ƽ
CAUTION: The burner openings must be positioned
properly over the valve orifices. Figure 20 (a).
Check proper assembly before fastening manifold in place.
Figure 20 (b).