Yamaha CC-5 - Manual (Page 23)

1 2 3 4 5
6 7 8 9 0
CLEAR CALL + TIME PROG
REPEAT CD
BAND TUNER
HALL JAZZ CLUB ROCK CNCT OFF
POWER AUX DAT VOLUME
TAPE
-
b
a
10
+
E-21
To recall a memorized station
1
Select the TUNER position.
2
Select the desired frequency band. [FM or AM (LW or
MW)]
3
Press the TUNER PRESET ( or ) button to recall
the desired preset station number. The caption FM or AM
(LW or MW) and a frequency will appear in the display.
4
To set to FM stereo mode, press the FM MODE button so
that the “STEREO” indicator on the display lights up. If the
reception is poor, press the FM MODE button so that the
“STEREO” indicator goes out.
*
The “AUTO ST” indicator lights up when an FM
broadcast is in stereo.
* Please note that when the unit is being tuned in the FM
stereo mode, interim station noise as well as weak
stations are suppressed. Only in the FM monaural
mode, weak and noisy stations can be received.
To switch the unit off after use
Set the unit to the STANDBY mode by pressing the POWER
switch. (The indicators will go off except for the STANDBY
indicator and the current time display.)
Notes
• Memory recalls the last station received even after
changing the BAND selector button or setting the unit to
the STANDBY mode.
• After a power failure that lasts for some time, the contents
of the memory will be lost. When power is restored, store
your selections in memory again.
(For power failures of just a few hours, the contents of the
memory will not be lost.)
To clear all memorized stations
To clear all the memory contents or when the display is
incorrect:
1
Set the unit to the STANDBY mode.
2
Disconnect the AC supply lead from the AC outlet.
3
Press the RESET button for at least 60 seconds.
TUNER OPERATION
1
3 2 4
3
1
2
3