Zenith HD-SAT520 User Manual
Page 25
24
206-3813
3-4. Connecting to Antennas - Round Dish (Satellite A)
Receiving Signals
1. Connect the “Antenna” to the “ANT IN” jack on the DIRECTV
®
High-Definition Receiver using a coaxial RF
cable.
2. Connect the cable TV signal to the “CABLE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable.
3. Connect the “Jack 1” of the dish antenna to the “SATELLITE IN” jack on the DIRECTV HD Receiver using a
coaxial RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your
satellite dish antenna.)
4. Connect the “Phone Wall Jack” to “PHONE JACK” on the DIRECTV HD Receiver using a phone cable.
Cable TV
wall jack
LNB
Sat A
Dish
Jack 1
Phone wall jack
Antenna
NOTE
While you are subscribing to a DIRECTV
®
pro-
gramming package, you can still view over-the-
air and cable TV programs, if you make con-
nections to the over-the-air and/or cable jacks.
NOTE
You may not be able to receive DIRECTV
®
High-
Definition programming with a round dish.
A triple LNB multi-satellite dish antenna with a
SAT C LNB is required, along with this
DIRECTV HD Receiver and high-definition tele-
vision.