Zenith HD-SAT520 - Manual (Page 29)

28
206-3813
3-5. TV Connection - HD Monitor (Y/PB/PR type)
TV Viewing
1. Connect the “OUT TO TV” jack on the DIRECTV ® High-Definition Receiver to the “ANT IN” jack on your TV using
a coaxial RF cable.
2. Connect the “COMPONENT OUT” jacks on the DIRECTV HD Receiver to the “COMPONENT IN” jacks of your TV
using RCA-type cables. (The “TYPE” switch must be set toward the “Y/PB/PR” jacks.)
3. Connect the L/R “AUDIO OUT” jacks on the DIRECTV HD Receiver to the L/R “AUDIO IN” jacks on your TV using
RCA-type cables.
(Note : The component out jacks are available when 480p, 720p, or 1080i display format is selected.)