Zenith HD-SAT520 - Manual (Page 85)

84
206-3813
8-14. Setting Default Signal Out
Output Channel
Lets you choose the channel used to view the DIRECTV ® High-Definition Receiver when
connected to the TV from the "OUT TO TV" jack, either channel 3 or, 4. Make sure your TV
is set to the selected channel and that the DIRECTV HD Receiver's display format is set at
"480i".
To set the channel number of the DIRECTV HD Receiver:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down using “ E ” on the remote control.
3. Select the Preference menu by pressing “ ”.
4. Scroll down to Output Channel using “ E ”.
5. Move the highlight to the right with “ G ”.
6. Select Channel 3 or 4 and press “ ” to return to the previous level.
7. Press the Exit button on the remote control to return to TV viewing.