Zenith HD-SAT520 - Manual (Page 73)

8-9. Setting the Clock
Clock (Auto)
Enables adjustment of the time zone and activation of daylight savings time. Normally, your
clock is set using signals transmitted by DIRECTV.
To set auto clock:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down using “ E ” on the remote control.
3. Select the Setup menu by pressing “ ”.
4. Scroll down to Clock using “ E ”.
5. Move the highlight to the right with “ G ”.
6. Select your time zone between Eastern and Hawaii by pressing “ G ” continuously.
7. Scroll down to Daylight Saving and press “ G ” to switch daylight saving on or off.
8. If you want to reset the clock, scroll down again to “Reset” and press “ ”.
The highlight will return to the previous level.
9. Press the Exit button on the remote control to return to TV viewing.
206-3813
72