Yamaha RP-U100 - Manual (Page 12)

7
Connecting Speakers
The following illustration shows how to connect a pair of speakers and subwoofer. Con-
nect the left speaker to the left speaker connector on the RP-U100 and the right speaker
to the right speaker connector, and pay careful attention to the plus and minus polarities.
Speaker Cables
Strip 10 mm of insulation off the end of
each speaker cable, and then twist the bare
wires to prevent lose strands, which can
cause short circuits.
Speaker Connectors
Flip open the speaker connector levers,
insert the bare ends of the speaker cables
into the terminal holes, then close the
levers. Try pulling gently on each cable to
make sure that it’s secure.
ANALOG
PC IN
AUX 1
IN
SUB WOOFER OUT
IN
OUT
AUX 2
R L
ANTENNA
AM
FM
75 Ω UNBAL
GND
DIGITAL
SPEAKERS
6 Ω MIN./SPEAKER
+
–
USB
OPT OUT
AUX 1
OPT IN
COAX IN
PC
OPT IN
R L
SUB
WOOFER
OUT
OUT
R L
SPEAKERS
6 Ω MIN./SPEAKER
+
–
R L
INPUT
Subwoofer
Left speaker Right speaker
SUPERWOOFER SYSTEM YST-SW45
HIGH CUT STANDBY/ON
150Hz 50Hz
VOLUME
10 0
10 mm
(1/2")
~
Speaker cable