Yamaha RP-U100 - Manual (Page 13)

8
Connecting an FM
Antenna
Connect an FM antenna
to the FM ANTENNA
connector (FM 75
Ω
UNBAL).
Use the supplied indoor FM antenna only
in areas with exceptionally good reception.
Use the supplied F-type adapter to con-
nect an outdoor FM antenna with an
F-type connector.
Connecting the AM Loop
Antenna
1. Flip open the AM and GND ANTENNA
connector levers.
2. Insert the AM antenna cable into the
AM and GND connectors. (Polarity is
not important.)
3. Close the levers to secure the cable.
4. Site the AM loop antenna away from
the PC and monitor.
5. Rotate the antenna to find the
position that offers the best
reception.
Recommended Speaker
Placement
For best performance, place the left and
right speakers either side of your com-
puter monitor, as shown below, and posi-
tion them so that their fronts are flush. To
get the best from the sound field programs
and surround effects, the left and right
speakers and the listener should be posi-
tioned so as to form a triangle with a 3:4
ratio, so if, for example, the speakers are
60 cm (23.5") apart, the listener should be
80 cm (31.5") away from each speaker.
Bass performance can be extended by con-
necting a subwoofer, such as the Yamaha
YST-SW45, to the SUB WOOFER OUT.
Recommend Listening Position
F-type adapter
F-type
connector
ANTENNA
AM
FM
75
Ω
UNBAL
GND
DIGITAL
SPEAKERS
USB
COAX IN
PC
OPT IN
➀
➁
➄
➂
PC AUX1 AUX2 TUNER
DSP P-SET
PERSONAL RECEIVER RP-U100
SUPERWOOFER SYSTEM YST-SW45
HIGH CUT STANDBY/ON
150Hz 50Hz
VOLUME
10 0
Left
speaker Right
speaker