Yamaha RP-U100 - Manual (Page 23)

18
Reinstalling the Driver Software
If you connect the RP-U100 to the PC’s USB port before installing the supplied appli-
cation software, the RP-U100 driver software will not be installed correctly and the
System Properties window will display the following items:
• “USB Audio Device” in the Sound,
video and game controllers list
• “USB Human Interface Device” in the
Human Interfaces list
• “USB Composite Device” in the Uni-
versal serial bus controllers list
Although you will be able to control the
application software and listen to
music, you must reinstall the RP-U100
device driver if you want the PC to rec-
ognize the RP-U100 correctly, as
explained below.
1. Make sure that the RP-U100 is con-
nectedto the PC’s USB port.
2. On the System Properties window,
click the “+” symbol next to
“Universal serial bus controller.”
3. Select “USB Composite Device.”
4. Click Delete. The dialog box shown
on the below appears.
5. Click OK to delete.
6. Confirm that “USB composite
device” has been deleted from the list
of Universal serial bus controllers.
7. Disconnect the USB cable from the
PC.
8. Insert the YAMAHA RP-U100
CD-ROM into the CD-ROM or DVD
drive and reinstall the driver
software.
9. Check that the driver software has
been installed correctly, as explained
on page 17.
Select “USB Composite Device.”