Yamaha DVD-S795 - Manual (Page 12)

12
Connection
Connecting to an AV amplifier which does not contain Dolby Digital or dts (digital theater
systems) decoder
This DVD/Video CD/CD player contains a Dolby Digital decoder. This enables the playback of DVDs recorded in Dolby Digital Sur-
round or Linear PCM without the need for an optional decoder with Dolby Digital or Linear PCM processing. When the DVD/Video CD/
CD player is connected to an AV amplifier with 5.1ch input connectors, you can enjoy theater-quality audio in your home when playing
discs recorded in Dolby Digital Surround or Linear PCM.
TV set (optional)
Video/audio
cord
(supplied)
DVD/Video CD/CD player
Audio cord
(optional)
Notes:
Á After connection is made, set the “8 Speaker Setting” (such
as Yes/No and Large/Small) according to your speaker sys-
tem. (See page 40.)
Á
If the surround speakers are set to “No” at the “8 Speaker
Setting” (see page 40), the discs recorded in Linear PCM will
be played back only in 2 channels even when the center
speaker is connected as well as the front speakers.
Á DVDs recorded in Linear PCM/96 kHz sampling in which
“Center Speaker” is contained will also be played back only
in 2 channels.
Á
If the player is connected to the AV amplifier as shown
above, audio recorded in dts will not be output. To enjoy dts
sound, it is necessary to connect the player as shown on
page 10.
Direction of
signal flow
Video cable
(optional)
To component video input
connectors (Y, C
B
, C
R
)
PCM/ U DIGITAL
DTS
COAXIAL
AUDIO OUT
OPTICAL L
SUBWOOFER
CENTER SURROUND
6CH DISCRETE MIXED 2CH VIDEO
MAIN
S VIDEO
Y C B C R
R
L
R
L
R 2
1
VIDEO OUT
COMPONENT VIDEO
AC IN
CENTER
SUB
WOOFER
MAIN SURROUND AUDIO SIGNAL
DVD/LD
L
R
L
R
VIDEO SIGNAL
S-VIDEO
6CH DISCRETE INPUT DVD/LD
AV amplifier without
Dolby Digital/dts
decoder (optional)
S video cord
(optional)
In the case of the AV amplifier without
5.1ch input connectors In the case of the AV amplifier
with 5.1ch input connectors
or