Yamaha DVD-S795 - Manual (Page 38)

38
Initial settings
Selecting digital output
Select the digital output to be output from the optical/coaxial
digital audio output connector of the player.
1
At the initial settings screen (on page 30)
Press the cursor buttons (
A
,
B
) to select
“7 Digital Audio Output” and press
SELECT.
2
Press the cursor buttons (
A
,
B
) to select
the preferred item and press SELECT.
1 LPCM 96k > 48k:
To select whether digital audio converted to 48 kHz/
16 bit is output from the optical/coaxial digital audio
output connector or no digital audio is output during
playback of the DVD recorded in Linear PCM of
96 kHz.
(In case of the DVD recorded in Linear PCM of 48 kHz,
digital audio converted to 48 kHz/16 bit is output irre-
spective of the setting.)
2 Dolby Digital:
To select the signal format (Bitstream or PCM) to be
output from the optical/coaxial digital audio output con-
nector during playback of the DVD recorded in Dolby
Digital.
3 dts:
To select whether dts bitstream is output from the opti-
cal/coaxial digital audio output connector or no digital
audio is output during playback of the DVD recorded in
dts.
POWER
@ STOP
TITLE
SUBTITLE
MARKER
ANGLE AUDIO
ON SCREEN RETURN
MENU
SELECT
H SKIP I F G
D PLAY g STILL/PAUSE
OPEN/CLOSE
* / I
PLAY MODE
REPEAT
A-B CLEAR
DVD
SET UP
SLOW/
SEARCH
SELECT
Digital Audio Output
1 LPCM 96k 48k
0 Exit
No
2 Dolby Digital
3 dts
Bitstream
Off