Yamaha DVD-S795 - Manual (Page 30)

30 30
Initial settings
Once the intial settings have been completed, the player can
always be operated under the same conditions (especially with
DVD discs).
The settings will be retained in the memory, until the settings
are changed, even after switching to standby mode.
Common procedures of initial settings
1
Press SET UP in the stop mode.
2
Press the cursor buttons (
A
,
B
) to select
the preferred item and press SELECT.
Each screen for setting the value is displayed.
1 Disc Languages (see page 31)
2 Ratings (see page 32)
3 Menu Language (see page 33)
4 On-Screen Messages (see page 34)
5 FL Display (see page 35)
6 TV Aspect (see page 36)
7 Digital Audio Output (see page 38)
8 Speaker Setting (see page 40)
9 Other Settings (see page 42)
3
Press the cursor buttons (
A
,
B
) to select
the preferred value and press SELECT.
Á Some items require additional steps. (See the respec-
tive page.)
To cancel during setup operation
Press RETURN or select “0”. (The previous screen is dis-
played.)
To clear the initial settings screen
Press the cursor buttons ( A , B ) to select “0” and press
SELECT. (Pressing SET UP or RETURN also clears the initial
settings screen.)
Note:
Á
After the player is set to the “Lock All” setting in “2 Ratings”,
none of the initial settings, including “2 Ratings”, can be
changed if the DVD disc is left inside the player. In this case,
remove the disc, and unlock the player.
For your reference:
Á The numeric buttons can also be used for selecting items or
values instead of the cursor buttons (
A , B ); in this case,
pressing SELECT is not necessary.
POWER
@ STOP
TITLE
SUBTITLE
MARKER
ANGLE AUDIO
ON SCREEN RETURN
MENU
SELECT
H SKIP I F G
D PLAY g STILL/PAUSE
OPEN/CLOSE
* / I
RETURN
PLAY MODE
REPEAT
A-B CLEAR
DVD
SET UP
SET UP
CLEAR
SLOW/
SEARCH
SELECT
1 Disc Languages
Level 8 2 Ratings
3 Menu Language
4 On-Screen Messages
5 FL Display
6 TV Aspect
7 Digital Audio Output
8 Speaker Setting
9 Other Settings
0 Exit
English
Bright
4:3