Yamaha Plug-in Effect mLAN16E - Manual (Page 21)

21 TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
English
Connecting the mLAN16E (MOTIF ES)
q Nickname
This field indicates the nickname of the
connected mLAN16E. To change the nickname,
refer to “Node Information” in the mLAN
Graphic Patchbay Online Manual.
w Model Name
This parameter enables you to select an mLAN
device to which you wish to make an mLAN
connection in a multiple mLAN device network.
When the mLAN16E is connected, select the
name of the device equipped with an
mLAN16E.
e [Update] button
Clicking this button updates the information on
the mLAN devices connected to the mLAN
network. Use this button when you add an
mLAN device to the network while mLAN Auto
Connector is running.
r [Identify] button
Clicking this button causes the mLAN16E
ACTIVE indicator to flash for a few seconds.
t Sample Rate
This parameter enables you to specify the
sampling frequency (wordclock frequency).
y Wordclock Master radio buttons
These buttons enable you to specify the
computer or mLAN16E as the wordclock
master.
u PC → MOTIF ES
This parameter enables you to specify the
number of channels of audio data input into the
mLAN16E from the computer’s audio output
(mLAN driver’s audio output).
i [ASIO/WDM] button
Select the ASIO or WDM driver as appropriate
for your environment.
• With the MOTIF ES, WDM will use the last two of the
ASIO channels selected via “mLAN INPUT.” The WDM
channel signals will be routed to the MOTIF ES as
“mLAN IN 7/8CH.”
q
w
t
u
!1 !2 !0
e
r
y
i
o