Yamaha Plug-in Effect mLAN16E - Manual (Page 41)

41 TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
English
• Make sure that you set up the wordclock correctly. Also, make sure that one node is assigned as
master and the other nodes are assigned as slaves.
........... Refer to “mLAN Connection Settings” in the mLAN Graphic Patchbay
Online Manual.
■ The computer processing speed is too slow.
■ The computer’s CPU meter indicates a heavy processing load.
■ Playback response is delayed.
• If multiple S200-compatible devices are connected to the network, connecting mLAN devices in
mLAN Graphic Patchbay may require more time.
■ Inconsistency in wordclock, or unable to exit from Auto Connector
• (For Windows) Mobile computers with Intel CPU
SpeedStep ™ technology is applied for some CPU’s (CPU for notebook PC). Please disable the
SpeedStep ™ technology when mLAN is employed. SpeedStep ™ technology changes CPU
clock dynamically depending on the loading on the CPU to save the power consumption.
- How to disable the SpeedStep™ technology;
In almost all of the PC’s, BIOS has a function to select enabling or disabling the SpeedStep™
technology. Please refer to the PC’s operating manual, or make inquiry to the PC manufac-
turer.
■ Unable to change the mLAN settings
• (For Windows) Is the mLAN (WDM) driver selected as the default audio device for the system?
- Select [Start | Control Panel | Sounds and Audio Devices | Voice].
Make sure that something other than “mLAN Audio 01” is selected for the [Voice playback]
and [Voice recording] settings.
- Select [Start | Control Panel | Sounds and Audio Devices | Audio].
Make sure that something other than “mLAN Audio 01” is selected for the [Sound playback]
and [Sound recording] settings.
- In “MIDI music playback,” select any option other than the range of options from “mLAN
MIDI Out” through “mLAN MIDI Out (8).”
• (For Windows) Select [Start | Control Panel | Sounds and Audio Devices | Sounds]. And select
“No sounds” in the [Sound scheme], then execute again.
• If you cannot quit mLAN (by selecting “OFF” after right clicking the mLAN icon in the task bar),
end the processes listed below manually. ([Ctrl] + [Alt] + [Delete] → [Processes] → select process
→ [End process]) When finished, start mLAN Manager to change the mLAN settings again.
- mLANVDevice.exe
- mLANTFamily.exe
- mLANSoftPH.exe
- mLANManager.exe
• To change mLAN settings, select [Start | (All) Programs | Start Up], then start mLAN Manager.
• (When a message such as “file cannot be found” appears when uninstalling:)
Try executing the installation once more, then uninstall again.
■ (Windows) mLAN Manager (the mLAN icon in the Task bar) has disap-
peared.
• Select [Start | (All) Programs | Start Up (or mLAN Tools)], then select mLAN Manager.