System requirements for i88x/mlan16e software, English – Yamaha Plug-in Effect mLAN16E User Manual

Page 29

Advertising
background image

29

TOOLS for i88X/mLAN16E, Plug-in Effect

Installation Guide

English

System Requirements for i88X/mLAN16E Software

The system requirements below are necessary for using the included software.

• The system requirements below may differ slightly depending on the particular operating system.

• For details on minimum requirements for each DAW (digital audio workstation) software, refer to the respective owner’s

manual.

i88X/mLAN16E (including the require-

ments for mLAN Tools 2.0/mLAN Appli-
cations for YAMAHA)

These are the total system requirements,
including the audio sequencer, mLAN Tools
2.0/mLAN Applications for YAMAHA and
the plug-in effects.

OS

: Mac OS 9.2 (Mac OS X and Mac

Classic environment are not sup-
ported.)

Computer

: System having a built-in S400 (400

Mbps) FireWire terminal. (*1)

Hard Disk

: Free disk space of 250 MB (i88X)/50

MB (mLAN16E) or more; high-
speed hard disk (*2)

Recommended system (*3)

• Connecting a single mLAN device to a com-

puter peer-to-peer:

Computer

: G4/G3 signal proces-

sor 900 MHz (or
higher)

Available Memory

: 512 MB or more (Vir-

tual memory must be
turned off)

• Connecting three mLAN devices to a com-

puter:

Computer

: G4 1.25GHz Single

processor, 1GHz Dual
processor, or higher

Available Memory

: 512 MB or more (Vir-

tual memory must be
turned off)

Minimum system requirements (*3)

Computer

: G4 dual processor

450 MHz or G4/G3
single processor 700
MHz (or higher)

Available Memory

: 320 MB or more (Vir-

tual memory must be
turned off)

*1 The computer must have an IEEE 1394

(FireWire) or i.Link terminal. If there is no ter-
minal, install an IEEE 1394 interface card
(PCI or PC).

For more details on system requirements and
recommended PCI or PC cards, see

http://www.yamahasynth.com

*2 Acrobat Reader is not included.

*3 The system requirements listed here apply

when using the included software and when
playing audio/MIDI data detailed below on
standard sequencer software. This may differ
depending the particular sequencer software
you are using.

Recommended system requirements (Connecting
a single mLAN device to a computer peer-to-peer)

Fs=44.1kHz/24-bit

Audio Driver 18In/18Out (i88X), 16 In/8
Out (mLAN16E)

MIDI Driver 1In/1Out (i88X), 3 In/3 Out
(mLAN16E)

16 MIDI and 12 Audio playback tracks

2 Audio recording tracks

2 Sends for Plug-in Soft Effect

10 Inserts for Plug-in Soft Effect

2 Channels for Plug-in Soft Synthesizer

Latency of 5msec or less

Recommended system requirements (Connecting
a computer and three mLAN devices)

Fs=44.1kHz/24-bit

Audio Driver 32In/32Out (total)

MIDI Driver 4In/5Out (total)

16 MIDI and 8 Audio playback tracks

2 Audio recording tracks

2 Sends for Plug-in Soft Effect

10 Inserts for Plug-in Soft Effect

2 Channels for Plug-in Soft Synthesizer

Latency of 5msec or less

Minimum system requirements

Fs=44.1kHz/16bit

Audio Driver 8In/2Out (i88X), 2In/
2Out(mLAN16E)

MIDI Driver 1In/1Out (i88X), 2In/2Out
(mLAN16E)

16 MIDI and 12 Audio playback tracks

2 Sends for Plug-in Soft Effect

6 Inserts for Plug-in Soft Effect

No Plug-in Soft Synthesizer

Latency of about 50msec

Advertising
This manual is related to the following products: