Zanussi ZYB992 - Manual (Page 6)

2. Touch and at the same time for approximately
2 seconds. The display shows the current language
selection.
3. Set the language with .
4. Touch and at the same time for approximately
2 seconds to confirm.
Do each step in approximately 5 seconds. If you do not
change the setting in approximately 5 seconds, data will
not be saved.
Pre-heating
1. Set function and maximum temperature.
2. Let the appliance operate without the food for approx-
imately 1 hour.
3. Set function and maximum temperature.
4. Let the appliance operate without the food for approx-
imately 10 minutes.
5. Set function and maximum temperature.
6. Let the appliance operate without the food for approx-
imately 10 minutes.
This is to burn off the residue in the appliance. The acces-
sories can become more hot than usually. When you pre-
heat the appliance for the first time, the appliance can
make an odour and smoke. This is the usual effect. Make
sure the airflow is sufficient.
Daily use
Warning! Refer to "Safety information" chapter.
The display
1 2 3 4 5 5
1 Oven function symbol
2 Time, Oven function name
3 Temperature
4 Heat indicator
5 Clock function indicators
Sensor Field Function Description
ON/OFF To activate or deactivate the appliance.
SELECTOR To set an oven function.
AUTOMATIC PROGRAMMES To set an automatic programme.
RAPID HEAT UP To decrease the heat up time.
PYROLYTIC CLEANING To start the Pyrolytic cleaning.
/ PLUS, MINUS To adjust the temperature or time.
CLOCK To set a clock function.
6