Zenith LMG340 - Manual (Page 15)

OPERA
TION
15
Recording Setup
Basic Recording Setups
11
Press CD or TUNER/BAND to select source.
22
Open the cassette deck TAPE B and insert a
blank cassette into the cassette compartment.
Set the recording direction
Press PLAY MODE repeatedly to set the recording
direction.
Recording from Radio, CD or Auxiliary
source
11
Press RECORD/ RECORD PAUSE ( REC or
) button .
“ REC” flashes and holds the cassette in pause
mode.
22
Press PLAY( ) on the front panel.
The recording begins.
To Pause Recording
To pause the recording, press RECORD/ RECORD
PAUSE ( REC
or ) button again.
“ REC” flashes in display window.
To Stop Recording
Pres s TAPE STOP ( ) .
CD to Tape Synchronized Recording
The CD synchro recording function dubs a complete CD
and programmed titles automatically onto a cassette.
11
In Stop mode, press CD SYNC..
“ REC” flashes and “ ” appears in the
display window.
22
The synchronized recording is started auto-
matically after about 7 seconds.
otes
• If you wish to record from the desired track, select
the desired track with
/ before
commencing CD synchro recording.
• A function change is not possible during
recording.
Wind the tape to the recording start point.
Only use normal tapes to make recordings.
You can only use deck B for recording.
TAPE-A TAPE-B
TAPE-A TAPE-B
X
TAPE-A TAPE-B
TUNER
CD SYNC.
PLAY MODE
REC
TUNER/
BAND
CD,
TAPE
STOP (
)
PLAY ( / )
• /
•PRESET DOWN
•PLAY (
/ )
•STOP ( )/ CLEAR
Presses
One
Two
Three
Display Function
Recording front side.
Recording front and
reverse side.