Zenith LMG340 - Manual (Page 16)

CD Playback (Continued)
16
TAPE-A TAPE-B
TAPE-A TAPE-B
X
TAPE-A TAPE-B
Basic Playback Setup
11
Press POWER to turn on the unit.
22
Press the CD button to enter the CD mode.
If no disc is in the disc drawer, the “NO DISC” indi-
cator appears.
33
Press CD OPEN/CLOSE ( ) and place the
disc into the disc tray.
The disc on the left (DISC 1) is played first.
ote
To load an 8cm(3 inch) disc, put it onto the inner circle
of the tray.
44
Press CD OPEN/CLOSE ( ) to close the disc
compartment.
55
Press PLAY ( ) or PLAY/ PAUSE ( ) on the
remote control.
To Pause Play
Press CD PAUSE (CD ) or PLAY/ PAUSE ( ) on
the remote control during playback.
Press the button again to resume play.
To Stop Play
Press STOP ( ) during playback.
To Skip a Track
• Press on the front panel or CD SKIP
on the remote control to go to the next track.
• When button on the front panel or CD SKIP
button on the remote control is pressed
once midway through a track, the player returns
to the start of that track. When it is pressed again,
a track is skipped each time the button is pressed.
To Fast Rewind or Fast Forward
After pressing and holding / on the front
panel or / on the remote control
during playback, press PLAY ( ) at the point you
want.
To Go to the Next Disc
Press DISC SKIP or D.SKIP during playback or
in Stop mode.
To Select a Disc Directly
Press DISC 1, DISC 2 or DISC 3 during playback or
in Stop mode.
When you press DISC 1-3 before playing a disc, the unit
will automatically start playing the selected disc.
With the label side up
CD OPEN/
CLOSE(
)
PLAY/ PAUSE
(
)
STOP ( )
DISC SKIP
D.SKIP
• /
•PLAY ( / )
•STOP ( )/ CLEAR
•CD PAUSE (CD )
DISC 1,2,3
DISC 1
POWER