Cd playback, Program play setup – Zenith LMG340 User Manual
Page 18
CD Playback
18
Program Play Setup
You can arrange the order of the tracks on the discs and
create your own program. The program can contain up
to 20 tracks.
11
Press PROG. (or PROGRAM on the remote
control) in the Stop mode.
22
Press D.SKIP or DISC DIRECT PLAY (DISC1/2/3)
to select the disc.
33
Use PRESET DOWN/UP or MULTI JOG SHUTTLE
on the front panel or CD SKIP
/
on the remote control to select the
track.
44
Press PROG. (or PROGRAM on the remote
control).
55
Repeat steps 1~4 to select additional discs and
tracks.
66
Press PLAY(
) (or PLAY/ PAUSE (
) on the
remote control).
To check program contents
Press
PROG.
(or
PROGRAM
on the remote control) in
Stop mode.
- The disc, track and program number will be displayed.
To clear program contents
Press
PROG.
(or
PROGRAM
on the remote control) in
Stop mode. Then press
CLEAR
on the front panel or
CD STOP (
)
on the remote control.
To add program contents
1.
Press
PROG.
(or
PROGRAM
on the remote control)
repeatedly in the program Stop mode until “Disc
Number” blinks.
2.
Repeat steps 2~5 as shown to the left.
To modify program contents
1.
Use
PROG.
(or
PROGRAM
on the remote control)
to display program number you want to
modify.
2.
Repeat steps 2~4 as shown to the left .
TAPE-A
TAPE-B
TAPE-A
TAPE-B
X
TAPE-A
TAPE-B
PROG.
PROGRAM
• PLAY (
/
)
• PRESET DOWN/UP
• STOP (
)CLEAR
PLAY/ PAUSE
(
)
CD STOP
(
)
DISC 1,2,3