Zenith LMG340 - Manual (Page 8)

8
Connections
Speaker System Connection
Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the
cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).
R
L
L
+
-
R
+
-
FM
Left speaker Right speaker
red
red
black
otes
• Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack base.
• If you use front speakers with a low maximum input rating, adjust the volume carefully to avoid excessive sound
output to the speakers.
• Do not disassemble the front cover of supplied speaker .
Antenna (Aerial) Connections
Connect the supplied FM/AM antennas for listening to the radio.
• Connect the AM loop antenna to the AM antenna connector.
• Connect the FM wire antenna (or FM “T” antenna) to the FM 300Ω connector.
otes
• To prevent noise pickup, keep the AM loop antenna away from the unit and other components.
• Be sure to fully extend the FM antenna wire.
• After connecting the FM antenna wire, keep it as horizontal as possible.
Position
it for the
best
reception
FM indoor
antenna(aerial)
FM external
antenna(aerial)
(not supplied)
300 cable
AM
AM loop antenna (aerial)
FM
(Supplied)