ZyXEL Communications Prestige 650HW - Manual (Page 123)

Prestige 650HW ADSL Router User’s Guide
8-4 Filter Configuration
For incoming packets, your Prestige applies data filters only. Packets are processed depending on whether a
match is found. The following sections describe how to configure filter sets.
The Filter Structure of the Prestige
A filter set consists of one or more filter rules. Usually, you would group related rules, for example, all the
rules for NetBIOS, into a single set and give it a descriptive name. You can configure up to twelve filter
sets with six rules in each set, for a total of 72 filter rules in the system.
8.2 Configuring a Filter Set
To configure a filter set, follow the steps shown next.
Step 1. Enter 21 in the main menu to display Menu 21 – Filter Set Configuration.
Figure 8-3 Menu 21 — Filter Set Configuration
Step 2. Type the filter set to configure (no. 1 to 12) and press [ENTER] .
Filter rule set 11 and 12 are used by the Web Configurator. Your custom
configurator may be lost if you use rule 11 or 12.
Step 3. Type a descriptive name or comment in the Edit Comments field and press [ENTER].
Menu 21 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 NetBIOS_WAN 7 _______________
2 NetBIOS_LAN 8 _______________
3 TELNET_WAN 9 _______________
4 PPPoE 10 _______________
5 FTP_WAN 11 _______________
6 12 WebSet
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel: