ZyXEL Communications Prestige 650HW - Manual (Page 185)

Prestige 650HW ADSL Router User’s Guide
15-2 Remote Management
15.4.1 Remote Management Setup
Remote management setup is for managing Telnet, FTP and Web services. You can customize the service
port, access interface and the secured client IP address to enhance security and flexibility.
You may manage your Prestige from a remote location via:
the Internet (WAN only), the LAN only, All (LAN and WAN) or Disable (neither).
WAN only (Internet) ALL (LAN and WAN)
LAN only Disable (Neither)
If you enable remote management of a service, but have applied a filter to block
the service, then you will not be able to remotely manage the service.
Enter 11, from menu 24, to display Menu 24.11 — Remote Management Control (shown next).
Figure 15-2 Menu 24.11 — Remote Management Control
Table 15-1 Menu 24.11 — Remote Management Control
FIELD DESCRIPTION EXAMPLE
Telnet Server
FTP Server
Web Server Each of these read-only labels denotes a service that you may use
to remotely manage the Prestige.
Port This field shows the port number for the remote management
service. You may change the port number for a service if needed,
but you must use the same port number to use that service for
remote management. 23
Access Select the access interface (if any) by pressing the [SPACE BAR].
Ch i
LAN l WAN l All Di bl Th d f lt i
LAN only
Menu 24.11 - Remote Management Control
TELNET Server:
Server Port = 23 Server Access = LAN only
Secured Client IP = 0.0.0.0
FTP Server:
Server Port = 21 Server Access = LAN only
Secured Client IP = 0.0.0.0
Web Server:
Server Port = 80 Server Access = LAN only
Secured Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: