ZyXEL Communications Prestige 650HW - Manual (Page 201)

Prestige 650HW ADSL Router User’s Guide
H TCP/IP
Appendix E
TCP/IP
All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed. Use straight-through
Ethernet cables to connect your computer's Ethernet adapter to a hub or switch and to connect the hub or
switch to the Prestige's LAN port. Otherwise, connect your computer's Ethernet adapter directly to the LAN
port with a crossover Ethernet cable.
Windows 95/98/Me/NT/2000/XP, Macintosh OS 7 and later operating systems and all versions of
UNIX/LINUX include the software components you need to install and use TCP/IP on your computer.
Windows 3.1 requires the purchase of a third-party TCP/IP application package.
TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later
operating systems.
After the appropriate TCP/IP components are installed, configure the TCP/IP settings in order to
"communicate" with your network.
Setting up Your Windows 95/98/Me Computer
Installing TCP/IP Components
1. Click Start, Settings, Control Panel and double-click the Network icon.
The Network window Configuration tab displays a list of installed components. You need a network
adapter, the TCP/IP protocol and Client for Microsoft Networks.
If you need the adapter:
a. In the Network window, click Add.
b. Select Adapter and then click Add.
c. Select the manufacturer and model of your network adapter and then click OK.
If you need TCP/IP:
a. In the Network window, click Add.
b. Select Protocol and then click Add.
c. Select Microsoft from the list of manufacturers.
d. Select TCP/IP from the list of network protocols and then click OK.
If you need Client for Microsoft Networks:
a. Click Add.