Yamaha H11 - Manual (Page 24)

H11 Owner’s Manual
24
ENGLISH
Formatting USB storage media
Formatting USB storage media
When a USB storage device is connected or media is inserted, a message may appear prompting you to format the device/
media. If so, execute the Format operation.
1
Engage the format mode.
After making sure that the USB flash memory is connected to the instrument,
press the
[PLAY/STOP] button while holding down the [MOVING KEY] button.
2
Search USB storage media to be formatted.
Press the [PLAY/STOP] button to start the search. A “n–y” message will appear
on the display if a USB flash memory device to be formatted is found. To cancel
format, press
[–/NO] button before pressing the [+/YES] button in step 3.
3
Start the format.
Press the [+/YES] button.
When the format operation is finished, an “End” message appears on the dis-
play.
4
Exit from format mode.
Press the [–/NO] or [+/YES] button to exit from format mode.
CAUTION
The format operation overwrites any previously existing data. Make sure that the media
you are formatting does not contain important data. Proceed with caution, especially
when connecting multiple USB storage media.
4 4 3
2 1 1
NOTE
The initialize mode cannot be
engaged while song playback is
active in BGM mode.
NOTE
If no media is found or initializa-
tion is failed, an “Err” message
and the error code will appear
alternately on the display.
F o r