Yamaha H11 - Manual (Page 43)

ENGLISH
Connections
H11 Owner’s Manual
43
Connections
Connectors
CAUTION
Before connecting the H11 to other electronic components, turn off the power to all the components. Before turning the
power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the
components may result.
1 AUX OUT[L/L+R][R] jacks
You can connect these jacks to a stereo system to amplify the H11 or to a cassette
tape recorder to record your performance. Refer to the diagram below and use
audio cables to make the connections.
CAUTION
When the H11’s AUX OUT jacks are connected to an external audio system, first turn on
the power to the H11, then to the external audio system. Reverse this order when you
turn the power off.
2 USB [TO DEVICE] terminal
This terminal is for connection to a USB flash memory device. For more informa-
tion, refer to “Precautions when using the USB [TO DEVICE] terminal” on page
22.
3 [LAN] port
This port allows direct connection of the H11 to the Internet, letting you use a spe-
cial streaming service on the Yamaha website for playing back songs in a variety of
musical genres as background music on the instrument. Before connecting the
instrument to the Internet, be sure to read “Internet Direct Connection (IDC)” on
page 33.
CAUTION
Do not directly connect the [LAN] port to your computer. The Internet functions can-
not be used if so connected.
q w e
NOTE
Use audio cables and adaptor
plugs with no resistance.
NOTE
Use only the AUX OUT [L/L+R]
jacks for connection with a
mono device.
H11
Stereo
AUX OUT AUX IN
phone plug
(standard) phone plug
(standard)
audio cable