Yamaha H11 - Manual (Page 30)

H11 Owner’s Manual
30
ENGLISH
Selecting & Playing Voices
Voice 2 Reverb Depth
While holding down the [VOICE] button, press one of the A-1–G#0 keys (see
Quick Operation Guide). The current Reverb Depth setting appears on the dis-
play while both controls are held.
2
Exit from the Dual mode.
Press the [–/NO] or [+/YES] buttons while the BGM mode is off, or press the
[VOICE] button while the voice number is shown in the display. In either case,
the Grand Piano 1 voice will be selected.
Saving the Voice Settings
Some of the current voice settings can be saved in the internal memory of the instrument. The data is maintained even
when the power is turned off.
Press the [PLAY/STOP] button while holding the [VOICE] button (see Quick Operation
Guide). When saving is complete, an “End” message appears on the display for three
seconds. The following settings can be saved:
• Reverb Type and Depth
• Octave
• Volume
To initialize the voice settings
Turn the power on while holding the [VOICE] and [PLAY/STOP] buttons.
TERMINOLOGY
Normal setting: G#0
The Voice 2 Reverb Depth is
determined according to the
default Voice 2 Reverb Depth
value for the voice.
NOTE
When you want to select the
voice as soon as you exit from
the Dual mode, press one of the
C1–A1 keys while holding down
the [VOICE] button (also see
Quick Operation Guide).
You can also exit from Dual
mode by pressing the [–/NO] or
[+/YES] buttons while holding
down the [VOICE] button. In this
case, the Grand Piano 1 voice
will be selected.
NOTE
The voice settings will be lost if
you change the voice without
storing it.
Operation